INDUSTRIAL TRAINING ASSOCIATES


​Get your 

Class 3

licence
with ITA
Picture
  • Courses
    • OSH Forklift
    • Fire Extinguisher
    • Confined Space
    • Safe Working at Heights
    • Mobile Elevated Work Platform
    • Lock Out Tag Out
    • Overhead Gantry
    • Hot Work Procedures
    • First Aid
    • Permit to Work
    • Emergency Warden
    • Safety Observer
  • Driver Training
    • Class 2
    • Class 3
    • Class 4
    • Class 5
    • Vehicle Recovery
    • WTR
    • Dangerous Goods transport
  • Training Schedule
  • Contact
  • Gallery
  • About Us
  • Privacy
 A Class 3 vehicle is a rigid vehicle with a gross laden weight of more than 18,000kg but less than 25,000kg.

​
About the Course


The Class 3 licence is a three-day or two-day course. 
Students must provide their own vehicle for this course

Day 1 is to offer support for you to pass your Class 3 learner licence. You will be instructed on the Class 3 and general Road Code. When you are ready, you then head to the AA to sit the Class 3 learner licence. You are not required to purchase a road code for this.

Day 2 you are required to be trained and work through each Unit Standard by filling out a workbook, (this is an open book exercise) as this is part of your learning process. This will be followed by a closed book assessment.

Day 3 the assessor will take you for a practical drive. Once you are competent, on the assessments and drive, you will be given your Class 3 certificate which you then produce to the AA, for it to be recorded on your licence.

NZTA licence fees:   https://www.nzta.govt.nz/driver-licences/licensing-fees/licence-fees/ 


What Will I Need?

You must have held a class 2 licence for at least 6 months (or 3 months if you are over 25)
Present a basic medical from your Doctor on a NZTA form. Your GP will have this.
Have something with your name and address on it and under six months old - e.g. power or phone account.
Bring steel cap boots if you have them, or covered shoes.


​In this course you will meet the requirements for the below Unit Standards:
Picture
Picture
Class 3 License GCW of more than 12,000kg but more than 25,000kg

$880 +GST ($1012. incl. gst)  3 Day Course (Day 1. Learners Study [Trainee to pay for Learner License at AA/VTNZ when sitting], Day 2. Fatigue and Class 2 Theory, Day 3. Practical sessions
$780 +GST ($897. Incl. gst)   2 Day Course (Days 2 & 3 of above)
​
​
contact ITA
Contact us for more information and to hear about our current training schedule
Picture

Contact Us

​​Phone:  (06) 879 4668 / 027 447 2729
Email:   ​bookings@ita-hb.co.nz   
​​1307 Tomoana Road, Hastings 4172
PO Box 2020,  Hastings 4156
Picture
Picture
Picture
Picture
Picture
Picture
  • Courses
    • OSH Forklift
    • Fire Extinguisher
    • Confined Space
    • Safe Working at Heights
    • Mobile Elevated Work Platform
    • Lock Out Tag Out
    • Overhead Gantry
    • Hot Work Procedures
    • First Aid
    • Permit to Work
    • Emergency Warden
    • Safety Observer
  • Driver Training
    • Class 2
    • Class 3
    • Class 4
    • Class 5
    • Vehicle Recovery
    • WTR
    • Dangerous Goods transport
  • Training Schedule
  • Contact
  • Gallery
  • About Us
  • Privacy